JVC KD-LX330R manual Using the sound control memory, Selecting and storing the sound modes

	What is BBEII?
ENGLISH
	The BBEII* function restores the brilliance and clarity
	of the original live sound in recording, broadcasts,
	etc.
	When a speaker reproduces sound, it introduces
	frequency-dependent phase shifting, causing high-
	frequency sounds to take longer to reach the ear
	than low frequency sounds. The BBEII function
	adjusts the phase relationship between the low, mid
	and high frequencies by adding a progressively
	longer delay time to the low and mid frequencies,
	so that all frequencies reach the listener’s ears at
	the proper time.
	In addition, the BBEII function boosts low and high
	frequencies, which loudspeakers tend to be less
	efficient in reproducing, through dynamic, program-
	driven augmentation. When combined with the
	phase compensation feature, the resulting sound
	has a clearer, more finely detailed “live” presence.
	As you turn the control dial, the BBEII function
	changes as follows:
	BBE 1	BBE 2	BBE 3

BBE OFF (Canceled)

(1) (2) (3)

Canceled

(OFF)

As the number gets higher, the BBEII function becomes stronger.

When shipped from the factory, the BBEII function is set to “BBE 2.”

To cancel the BBEII function, select “BBE OFF.”

*Under license from BBE Sound, Inc.

Ris a trademark of BBE Sound, Inc.

Using the sound control memory

You can select and store a preset sound

adjustment suitable for each playback source.

(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display.

A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD and external components.

•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM

– SCM LINK” on page 24.

1 Press MODE BAND.

BAND	The number buttons can work
	as different function buttons.

Within

5 seconds

2 Select the sound mode you want.

Each time you press the button, the sound mode changes as follows:

SCM BEAT SCM SOFT

SCM OFF SCM POP

•When “SCM LINK” is set to “LINK ON,” the selected sound mode can be stored in memory for the current source and the effect applies only to the current source. Each time you change the playback source, the SCM indicator flashes on the display.

•When “SCM LINK” is set to “LINK OFF,” the selected sound mode effect applies to any source.

20