Manuals / JVC / Home Audio / CD Player

JVC KD-LX330R manual English, When Security Lock works?, To change the password

Models: KD-LX330R

1 88

Download 88 pages 24.14 Kb

Page 72

1 Turn the control dial to enter a character.

ENGLISH

When Security Lock works?

Once you register the password, “ ” appears on the display, and the unit will ask you to enter the password in the following cases:

•When you turn on the unit for the first time after re-installing the unit.

•When you turn on the unit for the first time after replacing the car battery.

To use this unit, you must enter the correct password by following the procedure below.

1 Turn the control dial to enter a character.

2 Press ¢or 4 to move the character entry position.

3Repeat steps 1 and 2 to enter the entire password (4 letters) correctly, then press SEL (select).

•If you enter the correct password, the security lock is canceled and you can use the unit normally.

•In the following cases, the security lock is not canceled (“NOT ACCEPT” appears on the display) then the unit turns off. (The unit will never turn on unless you press the reset button on the front panel. See page 2.)

–If you enter an incorrect password then press SEL (select).

–If you cannot finish entering the correct password within 30 seconds.

If you enter an incorrect character while entering the password

Press 4 to move back the character entry position over the incorrect character, then turn the control dial to select the correct character.

To change the password

If you want to change the password after you have registered it, follow the procedure below.

1 Press SEL (select) and ¢ at the same time for more than 2 seconds.

“ ” appears on the display.

2 Enter the current password correctly, then press SEL (select).

The unit enters password entry mode.

3 Enter a new password as you want, then press SEL (select).

The password flashes on the display for a while, then the unit returns to the normal operation mode.

•See page 27 for details on how to enter the password.

28

Image 72

JVC KD-LX330R manual English, When Security Lock works?, To change the password, Turn the control dial to enter a character

Contents

KD-LX330R INSTRUCTIONSCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERHow to reset your unit Position And Reproduction Of LabelsPrecautions ENGLISHCONTENTS MAINTENANCEENGLISH BASIC OPERATIONSLOCATION OF THE BUTTONS Control panelHow to use the number buttons ENGLISHRemote controller ENGLISHPreparing the remote controller Installing the battery1. Remove the battery holder 2. Place the batteryBASIC OPERATIONS To drop the volume in a momentTo turn off the power 1 Turn on the powerRADIO BASIC OPERATIONS Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM Storing stations in memoryENGLISH FM1 FM2 FM3Tuning into a preset station Manual presetFM1 FM2 FM3 1 Select the band FM1RDS OPERATIONS What you can do with RDS EONENGLISH Using Standby Reception TA Standby ReceptionPTY Standby Reception 4 Press SEL select to finish the setting Searching your favourite programmeENGLISH PTY codesOther convenient RDS functions and adjustments code selected into the preset number5 Press SEL select to finish the setting 4 Press and hold the number button forAutomatic clock adjustment Setting the TA volume levelENGLISH Station name PS NAME Station Frequency FREQUENCYCD OPERATIONS Playing a CDENGLISH To stop play and eject the CDSelecting CD playback modes Locating a track or a particular portion on a CDTo fast-forwardor reverse the track To go to the next tracks or the previous tracksProhibiting CD ejection Playing a CD TextDisc Title / Performer Track Title Current track no. and Elapsed playing timeSOUND ADJUSTMENTS Adjusting the sound1 Select the item you want to adjust 2 Adjust the levelUsing the sound control memory Selecting and storing the sound modesWhat is BBEII? BBE OFF Canceledadjustments Storing your own soundRecalling the sound modes To reset to the factory settingsSetting the clock Changing the general settings PSMBasic Procedure OTHER MAIN FUNCTIONSPreferred Setting Mode PSM items 4 Press SEL select to finish the settingENGLISH To cancel Advanced SCM - SCM LINK BEEP SWITCHENGLISH To set the clock display - CLOCK DISPTo adjust the display contrast level To adjust the line input level - LINE ADJENGLISH CONTRASTControlling the volume automatically Audio Cruise 3 Select the desired settingTo change the FM tuner selectivity To turn the demo mode on or offTo adjust the volume increase rate 4 Press SEL select to finish the settingENGLISH If Audio Cruise does not function correctlyAssigning names to the sources ENGLISHTo erase the input characters 1 Select a source you want to assign a name toAvailable characters ENGLISHCapital letters Small lettersUsing the security lock Registering the passwordENGLISH 2 Select the character set you want to useWhen Security Lock works? To change the passwordENGLISH CD CHANGER OPERATIONS Playing CDsENGLISH To fast-forwardor reverse the trackCanceled Selecting CD playback modesTo go to a particular disc directly To show the CD Text informationREPEAT1 REPEAT2 Canceled INTRO1 INTRO2 CanceledENGLISH To play back only intros Intro ScanPlaying an external componentUsing a subwoofer EXTERNAL COMPONENT OPERATIONSENGLISH 1 Select the external componentTuning into an ensemble and one of the services What is DAB system?DAB TUNER OPERATIONS ENGLISHStoring DAB services in memory 4 Select a service you want to listen to3 Select a service of the ensemble you want DAB1 DAB2 DAB3Tuning into a preset DAB service 5 Repeat the above procedure to storeother DAB services into other preset preset DAB service you wantWhat you can do more with DAB To use Alternative ReceptionENGLISH ADDITIONAL INFORMATION ENGLISHPTY codes TROUBLESHOOTING SymptomsCauses RemediesMAINTENANCE Handling CDsHow to handle CDs Center holder To keep CDs cleanSPECIFICATIONS AUDIO AMPLIFIER SECTIONTUNER SECTION CD PLAYER SECTIONHaben Sie PROBLEME mit dem Betrieb? Hebt u PROBLEMEN met de bediening?Please reset your unit Refer to page of How to reset your unitKD-LX110R INSTRUCTIONSCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERHow to reset your unit PrecautionsPosition And Reproduction Of Labels ENGLISHCONTENTS MAINTENANCERADIO BASIC OPERATIONS ENGLISHHow to use the number buttons LOCATION OF THE BUTTONSControl panel ENGLISHRemote controller With an optionally purchased remote controllerENGLISH Preparing the remote controller Installing the batteryKD-LX110R To drop the volume in a moment To turn off the power1 Turn on the power 3 Adjust the volumeRADIO BASIC OPERATIONS Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM Manual preset of both FM and AM stationsStoring stations in memory ENGLISHTuning into a preset station Manual presetFM1 FM2 FM3 1 Select the band FM1AF indicator REG indicator RDS OPERATIONSWhat you can do with RDS EON ENGLISHUsing Standby Reception TA Standby ReceptionPTY Standby Reception The same programme can be received on4 Press SEL select to finish the setting Searching your favourite programmeENGLISH PTY codesOther convenient RDS functions and adjustments code selected into the preset number5 Press SEL select to finish the setting 4 Press and hold the number button forSetting the TA volume level Automatic clock adjustmentENGLISH Station name PS NAME Station Frequency FREQUENCYCD OPERATIONS Playing a CDENGLISH To stop play and eject the CDSelecting CD playback modes Locating a track or a particular portion on a CDTo fast-forwardor reverse the track To go to the next tracks or the previous tracksProhibiting CD ejection Playing a CD TextTo play back only intros Intro Scan Select text display mode while playing a CD TextSOUND ADJUSTMENTS Adjusting the sound1 Select the item you want to adjust 2 Adjust the levelUsing the sound control memory What is BBEII?BBE OFF Canceled Selecting and storing the sound modesadjustments To reset to the factory settings2Adjust the selected item Storing your own soundSetting the clock Changing the general settings PSMBasic Procedure 2 Select a PSM item you want to adjust. See pagePreferred Setting Mode PSM items 4 Press SEL select to finish the settingENGLISH To cancel Advanced SCM - SCM LINK ENGLISHTo set the clock display - CLOCK DISP To select the level meter - LEVELTo change the FM tuner selectivity To turn the demo mode on or offENGLISH To select the external component to useAssigning names to CDs To erase the input charactersAvailable characters 1 Select a source you want to assign aUsing the security lock Registering the passwordHow to Use the Provided CODE Sticker 5 Press SEL select to finish the settingWhen Security Lock works? To change the passwordENGLISH 1 Turn the control dial to enter a characterCD CHANGER OPERATIONS Playing CDsENGLISH To fast-forwardor reverse the trackSelecting CD playback modes CanceledENGLISH To go to a particular disc directlyCanceled CanceledTo play back only intros Intro Scan ENGLISHPlaying an external component 3 Adjust the volumeEXTERNAL COMPONENT OPERATIONS ENGLISHDAB TUNER OPERATIONS Tuning into an ensemble and one of the servicesWhat is DAB system? ENGLISHStoring DAB services in memory 4 Select a service you want to listen to3 Select a service of the ensemble you want DAB1 DAB2 DAB3Tuning into a preset DAB service DAB1 DAB2 DAB3ENGLISH 1 Select the DAB tuner DAB1-3ADDITIONAL INFORMATION What you can do more with DABENGLISH To use Alternative ReceptionTROUBLESHOOTING SymptomsCauses RemediesMAINTENANCE How to handle CDsTo keep CDs clean When playing a CD-Ror CD-RWSPECIFICATIONS AUDIO AMPLIFIER SECTIONTUNER SECTION CD PLAYER SECTIONHaben Sie PROBLEME mit dem Betrieb? Hebt u PROBLEMEN met de bediening?Please reset your unit Refer to page of How to reset your unitKD-LX330R/KD-LX110R INSTALLATIONTROUBLESHOOTING PROBLEMEN OPLOSSENELECTRICAL CONNECTIONS ENGLISH DEUTSCHFRANÇAIS NEDERLANDSund Lautsprecher