JVC KD-LX330R manual Other convenient RDS functions and adjustments, you want

	4 Press and hold the number button for
ENGLISH
	more than 2 seconds to store the PTY
	code selected into the preset number
	you want.

PTY preset number appears, and selected code name and “MEMORY” alternate on the display.

5 Press SEL (select) to finish the setting.

To search your favourite programme type

1 Press and hold PTY (programme type) for more than 1 second while listening to an FM station.

PTY The last selected PTY code

and preset number appear.

2 Select one of the PTY codes stored in preset number buttons (1 to 6).

PTY search for your favourite programme starts after 5 seconds.

•If there is a station broadcasting a programme of the same PTY code you selected, that station is tuned in.

•If there is no station broadcasting a programme of the same PTY code you selected, the station will not change.

Note:

In some areas, the PTY search will not work correctly.

Other convenient RDS functions and adjustments

Automatic selection of the station when using the number buttons

Usually when you press the number button, the preset station is tuned in.

However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in another frequency broadcasting the same programme as the original preset station is broadcasting.

In case no other station is tuned in, you can also search all receivable frequencies for the same programme (Programme search).

To activate programme search, follow the procedure below.

•Programme search takes a while.

•See also “Changing the general settings (PSM)” on page 22.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “P(Programme)-SEARCH.”

3 Turn the control dial to select “SEARCH ON.” Now programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same procedure and select “SEARCH OFF” in step 3 by turning the control dial counterclockwise.

14