HOW TO SET THE FACTORY PRESETS
Press and hold down CLEAR on the AVC System while it is in standby mode. Then press POWER button on the Display or TV POWER on the remote control unit to turn the System on.
All setting items (except TV channel) return to the factory presetting.
A
•Running the factory presetting operation also clears the secret number.
You can run the EZ Setup again by using the following steps. 1 Turn on the power of the Display and the AVC System.
2 Press MENU. (Make sure the menu screen displays.)
3 Press a/bto select “Setup”.
4 Press SET/ENTER.
A
•If the secret number setting screen displays, you need to enter your secret number.
•If you forget your secret number, refer to HOW TO SET THE FACTORY PRESETS above.
5 Press a/bto select “EZ Setup”. 6 Press SET/ENTER.
“EZ Setup completed” displays. After that, the screen changes to the TV mode.
The secret number is
.
A
•As a precautionary measure, make a note of your secret number above, scissor it from this manual, and keep it in a familiar place.
77
