Using external equipment
Viewing an image from a computer
Connecting a computer
Use the PC terminals to connect a computer.
A
•The PC input terminals are
•Refer to page 71 for a list of computer signals compatible with the System.
AVC System (front view)
RGB cable (commercially available)
ø3.5 mm stereo minijack cable (commercially available)
Computer
Signal names for 15-pin mini D-sub connecter
5 | 4 | 3 | 2 | 1 | Pin No. | Signal name | Pin No. | Signal name | Pin No. | Signal name | |
1 | R | 6 | GND (Ground) | q | Not connected | ||||||
10 | 9 | 8 | 7 |
| |||||||
| 6 | G |
| GND (Ground) |
| SDA | |||||
15 | 14 | 13 | 12 | 11 | 2 | 7 | w | ||||
|
|
|
|
| 3 | B | 8 | GND (Ground) | e | HD | |
|
|
|
|
| 4 | Not connected | 9 | +5V | r | VD | |
|
|
|
|
| 5 | CSYNC | 0 | GND (Ground) | t | SCL |
A
•Macintosh adaptor may be required for use for some Macintosh computers.
| TV CBL | VCR DVD |
|
TV | /SAT | /LD |
|
| /DTV |
|
|
POWER | INPUT |
| |
AV | FRONT |
|
|
MODE | SURROUND | MTS | CC |
| TWIN |
|
|
| PICTURE | SELECT |
|
VIEW |
| SUB | TWIN CH |
MODE | FREEZE | INPUT |
|
DISPLAY | SLEEP | EDIT/ | LEARN |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 | 100 ENT |
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Displaying an image from a computer
When connecting to a computer, the correct input signal type is automatically detected. If the computer image does not come in clearly, you may need to set the Auto Sync. adjustment on the “Auto Sync.” in the menu. (See page 46.)
You only need to select the input source on the “INPUT SOURCE” menu.
To view an image from a computer, select “PC” from the “INPUT SOURCE” menu using INPUT on the remote control unit or on the Dispaly. (See page 47.)
A
•Each time INPUT is pressed, the input source toggles.
•PC INPUT terminals cannot be used for audiovisual equipment. Use the INPUT 3 (HD) terminal on the rear of the AVC System when connecting audiovisual equipment with an RGB signal. (See page 41.)
43
