Sharp LC 30HV2U Auto Sync. adjustment PC mode only, Fine Sync. adjustment PC mode only, Clock

Adjustment settings

MENU	TV/SAT/DVD		DTV/DVD TOP
RETURN		MENU	MENU
SOURCE			DTV/SAT
POWER			GUIDE
		SET/
	ENTER		DTV/SAT
			INFO
	FAVORITE CH		VCR REC
A	B	C	D
POWER	INPUT	VOL−	VOL+

RECEIVER

MENU

Option

Auto Sync.

Fine Sync.

Audio Out [Fixed]

RETURN

Auto Sync.

Adjusting the image 32%

MENU
Option
Fine Sync.
H-Pos.	[0]	–90	+90

V-Pos.	[0]	–60	+60
Clock	[0]	–90	+90
Phase	[0]	–20	+20
Reset
RETURN

Auto Sync. adjustment (PC mode only)

For automatically adjusting the computer image. 1 Press MENU.

2 Press a/bto select “Option”, and then press SET/

ENTER.

3 Press a/bto select “Auto Sync.”, and then press SET/ENTER.

•Auto Sync. starts and “Adjusting the image.” displays.

A

•Return to the previous menu by pressing MENU RETURN.

•When Auto Sync. is successful, “Auto Sync completed successfully” displays. If not, Auto Sync. failed.

•Auto Sync. may fail even if “Auto Sync completed successfully” displays.

•Auto Sync. may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again.

•Be sure to connect the computer to the AVC System and switch it on before starting Auto Sync.

Fine Sync. adjustment (PC mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.

1 Press MENU.

2 Press a/bto select “Option”, and then press SET/

ENTER.

3 Press a/bto select “Fine Sync.”, and then press

SET/ENTER.

4 Press a/bto select the specific adjustment item.

5 Press c/d to adjust the item to your desired position.

6 Press MENU to exit the menu.

A

•When all adjustments are set to factory preset values,

1Press a/b to select “Reset”, and then press SET/

ENTER.

2Press a/b to select “Yes”, and then press SET/

ENTER.

•Return to the previous menu by pressing MENU RETURN.

Selected item	Description
H-Pos.	Centers the image by moving it to the left
	or right.
V-Pos.	Centers the image by moving it up or
	down.
Clock	Adjusts the clock frequency.
Phase	Adjusts the clock phase.

46