| levelling the appliance electrolux 41 |
Levelling the appliance | Changing door stop |
The four feet of the appliance are pre- adjusted.
Large degrees of unevenness can be compensated for by individually adjust- ing the height adjustable screw feet.
To do this lift the appliance and turn the adjustable feet in or out.
Important Do not use pieces of wood, cardboard or such like to level out une- venness in the floor, but adjust the height adjustable screw feet instead.
The stop on the door of the appliance can be changed if required to make it easier to load and unload laundry.
The door stop must not be changed if this would result in the appliance’s door stop being located on the opposite side of the door stop of a facing door.
Warning! The door stop may only be changed by a qualified person. If necessary, please contact our after- sales service.
Special accessories
The following special accessories are available from your Electrolux Service Force Centre or your specialist dealer:
Intermediate installation kits for stacked washer and iron aid appli- ance:
These intermediate installation kits can be used to arrange the iron aid appli- ance and an automatic Electrolux wash- ing machine (60cm wide, front loading) as a
Two versions can be supplied:
–without stacker plate
–with extractable stacker plate
Read the manual supplied with the in- stallation kit carefully.
