Multipoint
Plantronics Audio .920 supports multipoint technology, which allows you to switch between two different Bluetooth audio devices. This enables you to use one headset between two different phones.
Pair another Bluetooth device
Repeat the pairing steps with the new device.
Initiate a call
The headset initiates a call on the device you most recently connected to. To use the second phone, initiate the call using the controls on the second phone. The second phone forms a link with the headset.
Answer a call
An incoming call from either phone rings through to your headset.
•To answer a call, press the call control button.
Answer a call while talking on the other device
To answer the second call, the first call must be terminated. There is no function for placing one call on hold while answering another call from the headset.
•Press the call control button once to hang up the existing call, and then press the call control button again to answer the new call from the other phone.
•Wait for the beep and then answer the second call by pressing the call control button again.
If you choose not to answer the second call, and you have voice mail on the second device, the call will go to voice mail.
Hands-Free Features
If your phone and your wireless service provider both support
Action | Steps |
Redial the last number you | Press the call control button twice. You hear a high tone after each |
called | press. |
Voice activated dialing | When the headset is on, press and hold the call control button for |
| about 2 seconds until you hear 1 low tone. |
Reject a call | When your headset rings, press and hold the call control button for |
| about 2 seconds until you hear 1 low tone. |
TIP: When you reject a call the caller goes to voice mail.
ACCESSORIES AVAILABLE FOR PURCHASE
USB charging cable model #
Vehicle power charger model
Vent clip cradle model
To order, please contact your Plantronics supplier or go to www.plantronics.com.
14 | 0 | 0 | 15 |
