Installation
Unpacking
Check that the cooker hood has no damages. Transportation damages should immediately be reported to the one responsible for the transport Damages, faults and eventually missing details should immediately be reported to the seller. Take care of the packing material so that small children cannot play with it.
Placement
The hood is to be mounted on the wall.
When installed, the hood must be not less than 60 cm. above electric burners or 75 cm. above gas or
Electrical connection (not for | Fig. 7 |
UK) | |
Safety warnings for the electrician |
|
Before connecting the appliance to the power |
|
supply, check that the voltage indicated on the |
|
rating plate corresponds to the mains power supply |
|
available. Appliances fitted with a plug can be |
|
connected to any standard power socket within |
|
easy access. |
|
Should it be necessary to provide a fixed |
|
connection, the hood must only be installed by an |
|
electrician authorised by the local electricity board. |
|
When installing, an omnipolar disconnector with a |
|
distance of at least 3 mm between contacts must |
|
be provided. |
|
Fixed connection of the appliance must only be |
|
carried out by an authorised electrician. |
|
Electrical connection for UK |
|
only |
|
Safety warnings for the electrician |
|
Connect the hood to the mains supply via a double |
|
pole switch which has 3 mm minimum separation |
|
between the contacts. |
|
The switch must be accessible at all times. |
|
The following is valid in the United Kingdom only: |
|
- the wire which is coloured blue must be |
|
connected to the terminal which is marked with |
|
the letter N or coloured black, - |
|
- the wire which is coloured brown must be |
|
connected to the terminal which is marked with |
|
the letter L or coloured red. |
|
Min | Min | |
75 cm | ||
60 cm | ||
|
38
