What to do if
If your appliance fails to work properly please carry out the following checks.
Symptom | Solution |
|
|
The cooker hood will not start... | Check that: The hood is connected to the electricity supply. |
| Check that a fan speed has been selected |
|
|
The cooker hood is not working | Check that: The fan speed is set high enough for the task. |
| The grease filters are clean. |
| The kitchen is adequately vented to allow the entry of fresh air. |
| If set up for recirculation, check that the charcoal filter is still effective. |
| If set up for extraction, check that the ducting and outlets are not blocked. |
|
|
The cooker hood has | The safety |
switched off during operation... | Turn off the hob and then wait for the device to reset. |
| If the hood has been installed below the heights indicated in the |
| installation instructions the motor will |
| damage the hood. |
|
|
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number.
Please note that it will be necessary to provide proof of purchase for any
Special accessories*
Charcoal filter KF825 |
* Not available in UK, please contact your local Service Force Centre.
Technical Specifications
Model |
| Dimensions |
| Lighting | Grease filter | Power | Electrical | |
| Height | Width | Depth |
|
| absorption | connection | |
|
|
|
|
|
|
|
|
|
EFC6410 | 59,9 |
| 51,5 | 2 x 40W | 2 | 250W | ||
EFC9410 | 89,9 |
| 51,5 | 2 x 40W | 3 | 250W | ||
EFC650 | 59,9 |
| 51,5 | 2 x 40W | 2 | 250W | 230V | |
EFC950 | 89,9 |
| 51,5 | 2 x 40W | 3 | 250W | 230V | |
EFC9405 | 90 |
| 51,5 | 2 x 20 | 3 | 230W | ||
EFC6405 | 60 |
| 51,5 | 2 x 20 | 2 | 230 W | ||
CH 1200 | 119,9 |
| 51,5 | 2 x 40W | 4 | 250W | 230V | |
CH900 | 89,9 |
| 51,5 | 2 x 40W | 3 | 250W | 230V | |
CH600 | 59,9 |
| 51,5 | 2 x 40W | 2 | 250W | 230V | |
|
|
|
|
|
|
|
|
|
We reserve the right to generate constructive and chromatic modifications as required by technological growth.
35