Work light
The hood has two lamps 40 W (E 14 candle). Switch on and off with the left slide switch.
Correct ventilation
To have the cooker hood working correctly the windows in the kitchen should be closed. In stead a window in an adjacent room should be open.
Important to know
If the hood is run at the same time as a burner or fireplace that depend on ambient air (for example gas, Diesel, coal or wood heaters, water heaters, etc.) be careful, because the hood, when it exhausts the air, removes the ambient air required by the burner or fireplace for combustion.
Not valid if the cooker hood is used in recirculation mode.
Maintenance
Before performing any maintenance operation, disconnect the hood from the electricity.
Grease filter
This serves to hold the grease particles in suspen- sion.
Model EFT 625 is supplied with two grease filters, model EFT 925 is supplied with one grease filter. The metal filter should be washed every month with warm soapy water or, if possible, in the dishwasher (60°C).
Remove the filter:
lOpen the latch and rotate the grid downwards (Fig. 12).
lTo remove, pull forward from the right hand side and unhook.
lRelease the clips B (Fig. 13).
Leave to dry before refitting it, be sure that the grease filter/s cover the whole aspirating surface before refitting.
Grid must be cleaned as well as the grease filter.
Carbon filter
This filter dissolves cooking odours.
It should be changed every
The carbon filter must never be washed.
To remove the carbon filter, push the hooks C and pull the filter downwards (Fig. 9).
Fig. 11
| A | 2 |
CLOSED |
| |
| OPEN |
1
2 | 2 |
| |
| 3 |
4
Fig. 12
B | 3 |
|
2
1
Fig. 13
7
