electrolux induction cooktop troubleshooting 17
Troubleshooting
Problem | Possible cause | Remedy |
The appliance cannot | More than 10 seconds have | Switch the appliance on again |
be switched on or is not | passed since the appliance |
|
operating | was switched on |
|
| The lock is switched on | Switch off the lock (See the |
|
| section “Locking/unlocking the |
|
| control panel”) |
| The child safety device is | Deactivate child safety device |
| switched on | (See the section “Child safety |
|
| device”) |
| Several sensor fields were | Only touch one sensor field |
| touched at the same time |
|
| Safety | Remove any objects (pan, |
| triggered | cloths, etc.) that are lying on |
|
| the control panel. Switch the |
|
| appliance on again |
The cooking zones | The sensor fields are partly | Remove the cloth or the |
automatically reduce the | covered by a damp cloth or | liquid. Reset the cooking level |
cooking level to | with liquid | required |
The residual heat indicator is | The cooking zone was only | If the cooking zone is |
not displaying anything | on for a short time and is | supposed to be hot, call the |
| therefore not hot | Customer Service Department |
Acoustic signal sounds, | One or more sensor fields have | Uncover sensor field |
appliance switches off | been covered for longer than |
|
| 10 seconds |
|
Acoustic signal sounds and | The On/Off sensor field has | Do not place any objects on |
appliance switches itself on | been covered up, | the control panel |
and after 10 seconds off again | e.g. by a cloth |
|
Display is switching between | Power management is | See the section “Switching |
two heat settings | reducing the power of this | the power boost function on |
| cooking zone | and off” |
lights up | Unsuitable cookware | Use suitable cookware |
| No cookware on the cooking | Place cookware on the |
| zone | cooking zone |
| The diameter of the bottom of | Move onto a smaller cooking |
| the cookware is too small for | zone |
| the cooking zone | Use suitable cookware |
|
|
