Contents, Description of the Hob | Electrolux EHG 7763 specs

For the User		For the Installer
Important Safety Information	2	Instructions for the Installer	8
Description of the Hob	3	Important safety requirements	9
Operation	4	Installation	10
Maintenance and Cleaning	5	Building In	11
Something Not Working?	6	Electrical connections	12
Guarantee Conditions	7	Wiring Diagram	13
		Fault Finding	13
		Commissioning	15
		Conversion from Natural Gas to LPG	15

Description of the Hob

1.Auxiliary Burner

2.Semi-rapid Burners

3.Ultra-rapid Triple-crown Burner

4.Rapid Burner

5.Control knobs

Image 3

Contents

Instruction Booklet Important Safety Information Description of the Hob Contents Burner cap Burner crown Ignition electrode Thermocouple OperationHob burners Burner Minimum Maximum Diameter Ignition electrode Maintenance and CleaningHob Top Burners Symptom Solution Something Not Working?Cast Iron Pan Supports Guarantee Conditions Engineers technical data Instructions for the Installer Important safety requirements Provision for ventilationLocation Cut Out Size InstallationWhen the HOB is First Installed Gas Connection Fitting the Hob into the worktop BuildingBuilding over a cupboard or drawer Building over a kitchen unit with door Permanent Connection Supply cable replacementElectrical connections This HOB Must be Earthed Preliminary Electrical Systems Check Wiring DiagramFault Finding Ignitor Switch Ignitor Unit Ignition System / Gas Ignition Page Customer Care