Automatic Ice & Water Maker/Dispenser 19

Priming the water supply system

CAUTION

For proper dispenser operation, recommended water supply pressure should fall between 30 psi and 100 psi. Excessive pressure may cause water filter to malfunction.

1Begin filling the tank by pressing and holding a drinking glass against the water dispenser paddle.

2 Keep the glass in this position until water comes out of the dispenser. It may take about 1½ minutes.

3Continue

dispensing water for about three (3) minutes to flush

the system and

plumbing connections of any impurities (stopping to empty the glass as necessary).

NOTE

The water dispenser has a built-in device that shuts off the water flow after three (3) minutes of continuous use. To reset this shutoff device, simply release the dispenser paddle.

Ice maker operation & care

After the refrigerator is installed properly and has

cooled for several hours, the ice maker can produce ice within 24 hours. The ice maker will fill the ice bin from the rear. You must dispense some ice to force the ice forward in the bin. This will allow the bin to fill completely.

IMPORTANT

Your ice maker is turned on at the factory so it can work as soon as you install your refrigerator. If you cannot connect a water supply, set the ice maker’s On/Off icon to Off and turn off the water supply valve; otherwise, the ice maker’s fill valve may make a loud chattering noise when it attempts to operate without water.

Turning the fresh food ice maker on and off

Ice production is controlled by the ice maker’s On/Off icon on the control panel. Press and hold the “Ice Off” icon for three (3) seconds to turn the ice maker “ON” or “OFF”. If there is no indicator, then the ice maker is ON.

IMPORTANT

Turning off the ice maker will result in existing ice melting in the bin.

IMPORTANT

Turning off the ice maker will disable the ice dispenser. You will still be able to dispense water.

NOTE

The ice maker also has a built-in plastic signal bale arm that automatically stops ice production when the ice bin is full. This signal arm should not be used to manually stop the ice maker.

Using the ice maker after installation

Before making ice for the first time, be sure to prime

the water supply system. Air in new plumbing lines can

result in two (2) or three (3) empty ice maker cycles. Furthermore, if the system is not flushed, the first ice cubes may be discolored or have an odd flavor.

IMPORTANT

On occasion, unusually small ice cubes may be noticed in the bucket or in dispensed ice. This could occur in normal operation of the ice maker. If you start seeing these more frequently, it may be an indication of low water pressure or the water filter needs to

be replaced. As the water filter nears the end of its useful life and becomes clogged with particles, less water is delivered to the ice maker during each cycle. Remember, if it’s been six (6) months or longer since you last changed your water filter, replace the water filter with a new one. Poor quality household water may require the filter to be changed more frequently.

Page 19
Image 19
Electrolux EW23BC71IW Automatic Ice & Water Maker/Dispenser, Priming the water supply system, Ice maker operation & care

EW23BC71IW, EI28BS56IB, EW23BC71IB specifications

The Electrolux EW23BC71IB, EI28BS56IB, and EW23BC71IW are standout refrigerator models designed to meet the diverse needs of modern kitchens. Each model combines advanced technology with stylish aesthetics, offering features that enhance functionality, convenience, and energy efficiency.

One of the primary highlights of the EW23BC71IB is its spacious interior, which boasts a generous capacity suitable for families and frequent entertainers. The Flexi-Slide crisper allows users to create extra space for larger items, ensuring that no food is cramped or misplaced. Moreover, the model features a qualified AdjustTemp Pantry that provides specialized storage environments for different food types, maintaining optimal freshness.

The EI28BS56IB introduces innovative technology with its Advanced Cooling System. This is designed to rapidly cool the refrigerator after the door has been opened, ensuring minimal temperature fluctuations that could compromise food safety. This model also incorporates an energy-efficient LED lighting system that illuminates every corner of the fridge, making it easy to locate items quickly while saving on energy costs.

For those who value a minimalist aesthetic, the EW23BC71IW provides a sleek white finish and integrated handles, delivering a clean look that enhances any kitchen decor. Its design is not just about appearance; the model is equipped with a Noise Reduction technology, ensuring quiet operation and making it ideal for open-concept living spaces.

All three models incorporate the SmartSense technology, which continuously monitors temperatures and adjusts cooling cycles to maintain the ideal environment for food preservation. Additionally, their Energy Star certification ensures that they operate efficiently, contributing to lower energy bills and a reduced carbon footprint.

Other features include spill-proof shelves that contain messes, frost-free freezing for maintenance-free operation, and user-friendly digital controls that allow for precise temperature management. The flexibility provided by adjustable shelving systems and various storage compartments enhances user convenience.

In summary, the Electrolux EW23BC71IB, EI28BS56IB, and EW23BC71IW refrigerators combine style with practicality, offering ample storage space, advanced cooling technologies, and innovative design elements that cater to the demands of contemporary living while ensuring food remains fresh and accessible. Whether in search of style, efficiency, or technology, these models serve as reliable kitchen companions.