Important safety Instructions - Electrical & Installation

5

requirements

READ AND SAVE THESE INSTRUCTIONS

 

Electrical & Installation requirements

 

Electrical requirements

IMPORTANT

Observe all governing codes and ordinances.

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range hood is properly grounded.

Do not have a fuse in the neutral or ground circuit.

IMPORTANT

Save Installation Instructions for electrical inspector’s use.

The range hood must be connected with copper wire only.

The range hood should be connected directly to the fused disconnect (Or circuit breaker) box through metal electrical conduit.

Wire sizes must conform to the requirements of the National Electrical Code ANSI/NFPA 70 — latest edi- tion*, or CSA Standards C22.1-94, Canadian Electri- cal Code Part 1 and C22.2 No. 0-M91 - latest edi- tion** and all local codes and ordinances.

A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box).

Copies of the standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park Quincy, Massachusetts 02269

**CSA International 8501 East Pleasant Valley Road Cleve- land, Ohio 44131-5575

Before installing the hood

•Use the shortest and straightest duct route possible.

Refer to “Ductwork installation guidelines” paragraph for further informations.

Vent unit to outside of building, only.

2.At least two people are necessary for installation.

3.The hood is fitted with Screws and Drywall Anchors suitable for most surfaces, consult a Qualified Installer, check if they perfectly fit with your cabinet/wall.

4.Do not use flex ducting.

5.COLD WEATHER installations should have an additional backdraft damper installed to minimize backward cold air flow and a nonmetallic thermal break to minimize conduction of outside temperatures as part of the ductwork. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the ducting enters the heated portion of the house.

6.Make up air: Local building codes may require the use of Make-Up Air Systems when using Ducted Ventilation Systems greater than specified CFM of air movement.

The specified CFM varies from locale to locale. Consult your HVAC professional for specific requirements in your area.

Page 4 Page 6
Page 5
Image 5
Electrolux 316488521, EI36WC40GS, EI30WC40GS manual Electrical & Installation requirements, Electrical requirements
Page 4 Page 6

EI36WC40GS, 316488521, EI30WC40GS specifications

Electrolux has long been recognized as a leader in the home appliance sector, and the Electrolux EI30WC40GS and EI36WC40GS wall ovens represent a continuation of that tradition with their advanced features and innovative technologies. Both models are designed to enhance cooking experiences while providing impressive functionality and versatile options to suit various culinary needs.

One of the standout features of the Electrolux EI30WC40GS and EI36WC40GS is their sophisticated cooking technology. Both models come equipped with True Convection, ensuring even cooking results by utilizing an additional heating element and fan to circulate hot air throughout the oven cavity. This is essential for achieving perfectly baked goods and evenly roasted meals.

The ovens are designed with an intuitive Touch Screen Control Panel, allowing users to easily select cooking modes, temperatures, and timer functions. This user-friendly interface makes it simple to navigate through various cooking options, ensuring that even novice cooks can achieve professional results with ease. The ovens also feature a built-in temperature probe, allowing users to monitor the internal temperature of their dishes for precise cooking without the need to open the oven door.

Another notable characteristic is the spacious interior capacity of the EI30WC40GS and EI36WC40GS models. With ample space, these ovens can accommodate large roasts, multiple baking sheets, or even several racks of cookies simultaneously. This spacious design is complemented by a variety of rack configurations that make it easy to arrange dishes to achieve optimal cooking results.

Safety is also a key consideration with these models. They include features such as auto shut-off and control lock, ensuring that the ovens remain safe to use, especially in homes with children. Additionally, the self-cleaning function reduces the hassle of upkeep by breaking down food residues at high temperatures, leaving the oven ready for the next cooking challenge.

The sleek stainless steel finish of the Electrolux EI30WC40GS and EI36WC40GS adds a modern touch to any kitchen, enhancing aesthetic appeal while ensuring durability. Both models present a blend of style and functionality, making them excellent choices for those serious about cooking.

In summary, the Electrolux EI30WC40GS and EI36WC40GS wall ovens excel in combining innovative cooking technologies with practical features. Their spacious interiors, intuitive controls, safety options, and stylish design make them an ideal addition to modern kitchens, catering to both everyday cooking and special occasions.
Top Page Image Contents