Dishwashers
EIDW5905J S, EIDW5905J W, EIDW5905J B
Built-In Dishwasher Specifications
•Product Weight – 75 Lbs.
•Voltage Rating – 120V/60Hz/15 Amps
•Connected Load (kW Rating) @120 Volts = 1.44kW
(For use on adequately wired 120V, dedicated circuit having
•Amps @120V = 9 Amps
•Always consult local and national electric & plumbing codes. Meets requirements of ASSE 1006.
•Water Pressure – Hot water line to dishwasher must provide between 15 and 120 pounds per square inch (psi).
•Make sure location has right drain, water and electrical outlets to make connections.
•Keep back free of drain, water & electrical supply.
•Electrical and water supplies should enter cabinet opening on floor, or through back or side walls, as shown in shaded areas.
•Connections preferably located toward left side of dishwasher. Do not cross drain, water or electrical lines in front of motor, blower or frame.
•Minimum clearance of 5/16" required from unit to underside of countertop.
•Leveling legs supplied to adjust height. (Note: Height only adjustable to
•When installing adjacent to wall, cabinet or other obstruction that extends beyond front edge of unit, allow 2" minimum clearance between opened door and obstruction.
•When installing at end of cabinet line, sides must be fully enclosed.
•Do not install unit under a cooktop, damage may occur.
Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions.
Meets requirements of ASSE 1006
Electrolux Major Appliances, N.A.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • | High standards of quality at Electrolux Home Products, Inc. mean | |
we are constantly working to improve our products. We reserve the right | ||
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | ||
to change specifications or discontinue models without notice. |
EIDW5905J 02/11 | © 2011 Electrolux Home Products, Inc. | Printed in the U.S.A. |
