300 mm.

 

WALL FACE

 

 

 

 

 

BACK OF COOKER

480 mm.

mm.

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

STABILITY BRACKET

 

100

 

 

 

 

 

 

BASE OF COOKER

 

 

 

A

 

PENCIL LINE ON THE FLOOR

 

 

 

 

250 mm.

 

 

PLAN VIEW OF THE COOKER

SIDE VIEW

FO 2434

OF THE COOKER

Fig. 2

Dimensions are given in millimeters

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted.

(See safety Requirements: Page 22).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 250 mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/ 8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

 

600

450

 

130

 

FO 2435

Fig. 3

Dimensions are given in millimeters

23

Page 22 Page 24
Page 23
Image 23
Electrolux EK 5701 manual Fitting the Stability Bracket Not supplied, Connecting to Gas
Page 22 Page 24

EK 5701 specifications

The Electrolux EK 5701 is a highly versatile and innovative kitchen appliance that efficiently combines functionality with modern design. This built-in oven takes cooking to the next level, making it an essential addition to any contemporary kitchen.

One of the main features of the EK 5701 is its multifaceted cooking modes. It boasts a variety of cooking options, including conventional baking, grilling, and a range of specialized modes such as pizza and bread baking. This versatility allows users to experiment with a wide array of recipes, making it perfect for amateur cooks and seasoned chefs alike.

Equipped with Electrolux’s innovative technology, the EK 5701 showcases advanced heat distribution capabilities. The oven utilizes a fan-assisted convection system, ensuring that hot air circulates evenly throughout the cooking chamber. This results in consistent cooking results, eliminating the need for cumbersome rotations of trays or dishes.

Another standout characteristic of the EK 5701 is its intuitive control panel. The user-friendly interface features a digital display and touch controls, making it easy to select temperatures, cooking modes, and timers. This intelligent design means even novice users can navigate through settings with confidence, leading to impressive culinary outcomes.

The EK 5701 also prioritizes energy efficiency. With its A+ energy rating, it minimizes power consumption without sacrificing performance. This eco-friendly aspect not only contributes to lower energy bills but also aligns with modern sustainability goals.

Cleaning the EK 5701 is a breeze, thanks to its self-cleaning mechanism. The oven is designed with an easy-to-clean enamel interior, which prevents food residue from sticking, making maintenance straightforward. The self-cleaning function uses high temperatures to burn off any grime, leaving the oven interior fresh and ready for the next culinary adventure.

In terms of safety features, the EK 5701 comes equipped with a robust safety system, including a child lock feature, ensuring peace of mind for families. The oven also has a cooling fan that prevents the exterior from overheating, making it safe to touch even during intense cooking sessions.

In summary, the Electrolux EK 5701 is a remarkable built-in oven that seamlessly integrates advanced technology, user-friendly design, and energy efficiency. With its diverse cooking functions, efficient heating, and easy maintenance, it sets a new standard in culinary appliances, making cooking a delightful experience for everyone. Whether you're roasting, baking, or grilling, the EK 5701 is poised to deliver exceptional results every time.
Top Page Image Contents