Onkyo TX-SA706 Connecting a TV or Projector, Connecting the AV Receiver/AV Amplifier—Continued

Connecting the AV Receiver/AV Amplifier—Continued

Connecting a TV or Projector

See “Connecting Components with HDMI” on page 33 for HDMI connection information.

Step 1: Video Connection

Choose a video connection that matches your TV ( A , B , or C ), and then make the connection.

Step 2: Audio Connection

Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.

The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO MONITOR OUT, use the AV receiver/AV amplifier’s display when changing settings.

•With connection , you can listen to and record audio from your TV and listen in Zone 2.

•To enjoy Dolby Digital and DTS, use connection b or . (To record or listen in Zone 2 as well, use and , or and .)

Connection		AV receiver/AV amplifier	Signal flow			TV
	A	COMPONENT VIDEO MONITOR OUT	⇒	Component video input
		MONITOR OUT S	⇒		S-Video input
	C	MONITOR OUT V	⇒	Composite video input
		GAME/TV IN L/R	⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 2 (VCR/DVR)	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 1 (GAME/TV)	⇐	Digital optical output

b	C
	B
c
	a
A

L R

COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO IN			OUT	IN	IN

Connect one or the other

Connection b must be assigned (see page 44)

TV, projector,

etc.

Hint!

If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver/AV amplifier and use its tuner to listen to TV programs through the AV receiver/AV amplifier (see pages 28 and 30).

25