Onkyo TX-SA706 Connecting Zone, Connecting Your Zone 2 Speakers to an Amp in Zone, Hookup

Zone 2

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room.

Connecting Zone 2

There are two ways you can connect Zone 2 speakers:

1.Connect them directly to the AV receiver/AV ampli- fier.

2.Connect them to an amp in Zone 2.

Connecting Your Zone 2 Speakers Directly to the AV receiver/AV amplifier

This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. This is called Powered Zone 2, as the Zone 2 speakers are powered by the AV receiver/AV amplifier. Note that when Powered Zone 2 is turned off, you can enjoy 7.1-channel playback in your main room.

To use this setup, you must set the “Powered Zone2” setting to “Act” (see page 98).

Hookup

•Connect your Zone 2 speakers to the AV receiver/AV amplifier’s ZONE 2 L/R speaker terminals.

Main room

TV

AV receiver/AV amplifier

Zone 2

RL

Notes:

•With this setup, the Zone 2 volume is controlled by the AV receiver/AV amplifier.

•Powered Zone2 cannot be used if “Speakers Type” is set to “Bi-Amp” (see page 45).

Connecting Your Zone 2 Speakers to an Amp in Zone 2

This setup allows 7.1-channel playback in your main lis- tening room and 2-channel stereo playback in Zone 2, with a different source in each room.

Hookup

•Use an RCA audio cable to connect the AV receiver/ AV amplifier’s ZONE 2 LINE OUT L/R jacks to an analog audio input on your Zone 2 amp.

•Connect your Zone 2 speakers to the speaker terminals on your Zone 2 amp.

Main room

TV

AV receiver/AV amplifier

Zone 2
	IN
R	L
	Receiver/
	integrated amp

Note:

The Zone 2 volume must be set on the Zone 2 amp.

Zone 2 12V Trigger

When Zone 2 is turned on, the output from the 12V TRIGGER OUT ZONE 2 goes high (+12 volts, 100 mil- liamperes max). Connecting this jack to a 12-volt trigger input on a component in Zone 2 will make that compo- nent turn on or off as and when Zone 2 is turned on or off on the AV receiver/AV amplifier.

97