Onkyo TX-SA706 instruction manual Connecting Antenna TX-SR706only, Connecting the AM Loop Antenna

Models: TX-SA706

1 120
Download 120 pages 38.33 Kb
Page 20
Image 20
Connecting Antenna (TX-SR706 only)

Connecting the AV Receiver/AV Amplifier—Continued

Connecting Antenna (TX-SR706 only)

This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead (see page 21).

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use only.

FM ANTENNA jack

AM ANTENNA push terminals

1 Assemble the AM loop antenna, inserting the tabs into the base, as shown.

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1 Attach the FM antenna, as shown.

North American models

Insert the plug fully into the jack.

Other models

Insert the plug fully Connecting the AM Loop Antenna into the jack.

Once your AV receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2 Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

Caution:

Be careful that you don’t injure yourself when using thumbtacks.

2 Connect both wires of the AM loop antenna to the AM antenna push termi- nals, as shown.

(The antenna’s wires are not polarity sensitive, so they can be connected either way around.) Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.

Push

Insert wire

Release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once your AV receiver is ready for use, you’ll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception.

Keep the antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commer- cially available outdoor AM antenna (see page 21).

20

Page 20
Image 20
Onkyo TX-SA706 Connecting Antenna TX-SR706only, Connecting the AM Loop Antenna, Connecting the Indoor FM Antenna