Onkyo TX-SA706 Controlling Other Components, Preprogrammed Remote Control Codes, Notes

Controlling Other Components

You can use the AV receiver/AV amplifier’s remote con- troller (RC-717M) to control your other AV components, including those made by other manufacturers. This sec- tion explains how to:

•	Enter the remote control code for a component that
	you want to control: DVD, TV, VCR, etc.
•	Learn commands directly from another component’s

1	Look up the appropriate remote
	control code in the separate
	Remote Control Codes list.
	The codes are organized by category
	(e.g., DVD player, TV, etc.).

remote controller (see page 111).

• Program the MACRO buttons to perform a sequence

of up to eight remote control actions (see page 112).

Preprogrammed Remote Control Codes

The following REMOTE MODE buttons are prepro- grammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.

For details on controlling these components, see the pages indicated.

Onkyo DVD player (page 105)

Onkyo CD player (page 108)

Onkyo cassette recorder with u(page 110)

Onkyo RI Dock with u(page 109)

Entering Remote Control Codes

You’ll need to enter a code for each component that you want to control.

2

(3 seconds)

While holding down the REMOTE MODE button to which you want to enter a code, press and hold down the [DISPLAY] button (about 3 seconds).

The REMOTE MODE button lights up.

Notes:

•Remote control codes cannot be entered for the [RECEIVER] and [ZONE 2] buttons.

•Only TV remote control codes can be entered for the [TV] button.

•Apart from the [RECEIVER], [TV], and [ZONE 2] buttons, remote con- trol codes from any category can be entered for the REMOTE MODE buttons. However, these buttons also work as input selector buttons (page 54), so choose a REMOTE MODE button that corresponds with the input to which you connect your component. For example, if you con- nect your CD player to the CD input, choose the [CD] button when enter- ing its remote control code.

	DISPLAY
REMOTE	RECEIVER
MODE

Number buttons

3	Within 30 seconds, use the num-
	ber buttons to enter the 5-digit
	remote control code.

The REMOTE MODE button flashes twice.

If the remote control code is not entered successfully, the REMOTE MODE button will flash once slowly.

Note:

The remote control codes provided are correct at the time of printing, but are subject to change.

102