Electrical Connection
The oven is designed to be connected to
The oven has an easily accessible termi- nal block which is marked as follows:
Letter L | - | Live terminal |
Letter N | - | Neutral terminal |
E- Earth terminal
This oven must be earthed!
The cable used to connect the oven to the electrical supply must
comply to the specifications given be- low.
electrical connection electrolux 47
For UK use only
Connec- | Min. | Cable/ |
| |
size |
| |||
tion | flex | Fuse | ||
Cable/ | ||||
via | type |
| ||
flex |
| |||
|
|
| ||
|
|
| ||
Cooker | 2,5 mm2 PVC/PVC | min: | ||
Control |
| twin and | 15A | |
Circuit |
| earth | max: | |
|
|
| 20A | |
|
|
|
| |
It is necessary that you install a double pole switch between the oven and the electricity supply (mains), with a mini- mum gap of 3mm
between the switch contacts and of a type suitable for the required load in compliance with the current regulations. The switch must not break the yellow and green earth cable at any point.
Important
After installation and connecting, the ca- ble must be placed so that it cannot at any point reach a temperature of more than 50°C above the ambient tempera- ture.
Before the oven is connected, check that the main fuse and the domestic in- stallation can support the load; and that the power supply is properly earthed.
The manufacturer declines any re- sponsibility should these safety measures not be carried out.
