Electrolux EOG 621 manual Building, Location of appliance

Building in

Location of appliance

The appliance may be located in a kitchen, a kitchen/ diner or bedsitting room but not in a bathroom, shower room or bedroom.

It is essential that there is a minimum clearance of 3mm between the top surface of the appliance and the inside top of the cabinet. The unit must be fitted into a cabinet conforming to Fig.2.

This oven unit may be used in a Built-in or a Built-under situation (see relevant diagrams). If the appliance is to be built-under a hob, it is recommended thet the hob be installed before the oven unit.

Please ensure that when the oven is installed it is easily accessible for the engineer in the event of a breakdown.

BUILDING IN

The surround or cabinet into which the oven will be built must comply with these specifications:

λthe dimensions must be as shown in the relevant diagrams;

λthe materials must withstand a temperature increase of at least 60°C above the ambient temperature;

λproper arrangements must be made of a continuous supplyofairtotheoventopreventtheovenoverheating.

Dimensions of the oven and recess required are given in the relevant diagrams (in millimetres).

Fig.1	FO 0374
			550
		580				m
						in
					0
				4
				4
		560					110
			-
				570
Fig.2	FO 0290
			min 550
		min. 4
	591	560÷570
							110
Fig.3	FO 2128

			min 550
		min. 4
	591	560÷570
		140	240	110
Fig.4	FO 2129

15