HOW TO FINISH UNPACKING

￿Place packed appliance next to the cabinet in which it will be installed.

￿Remove the appliance packing except for bottom tray which should be left in position until the appliance is ready to be fitted into its cabinet.

NOTE: It is imperative that the appliance is left in the base to protect both the appliance and the floor.

￿Ensure the owner is given these operating instructions.

TOOLS REQUIRED

The following tools will be needed and it helps to assemble them before starting to install your oven:

A terminal screwdriver (3mm wide blade) A pozidrive screwdriver

Pliers Wirestrippers Knife Sidecutters Adhesive tape Tape Measure

MAKING THE ELECTRICAL

CONNECTIONS

Important: Switch off at mains, miniature circuit breaker and, if appropriate, remove fuse before commencing any electrical work.

PREPARING CABLE

We recommend you use a new length of cable to ensure your safety.

￿Ensure you have the correct length of cable appropriate to the wiring method you are using. When fitting new cable allow sufficient cable for removal of the unit at a later date, should it be necessary.

￿Score, but do not cut through, around the sheathing with a knife 100mm (4in) from each end of the cable and break through to the encased wires by bending the cable backwards and forwards to fatigue the sheathing.

￿Carefully score down from each of the cable sheathing along the length of the bare earth wire (if a cut was made along the length of the live or neutral wires, it might cut into their sheathing) to the cuts already made.

￿Carefully prise open the sheathing at each end of the cable to expose the encased wiring.

TO REMOVE COVER OF MAINS TERMINAL

From the rear of the appliance, remove mains input terminal cover to gain access to terminal block.

￿First remove retaining screw with pozidrive screwdriver. See Fig. 3.

Fig. 3

￿Prise cover loose using screwdriver in position

(1)then lever off with screwdriver in position (2) at either side. See Fig. 4.

Fig. 4

9

Page 8 Page 10
Page 9
Image 9
Electrolux EPDOMC manual HOW to Finish Unpacking, Tools Required, Making the Electrical Connections, Preparing Cable
Page 8 Page 10

EPDOMC, EPDOM specifications

The Electrolux EPDOM and EPDOMC stand out as innovative cleaning solutions designed to meet the diverse needs of modern households. These models exemplify the company's commitment to efficiency, user-friendliness, and advanced cleaning technologies. Aimed primarily at consumers looking for high-quality home appliances, the EPDOM series ensures an effective cleaning experience with features that cater to various demands.

One of the main features of the EPDOM and EPDOMC is their powerful suction capabilities. These models are equipped with advanced motor technology that delivers strong suction power. This ensures that even the most stubborn dirt and debris are effortlessly removed from a variety of surfaces. Whether it’s carpets, hardwood floors, or upholstery, users can expect pristine results post-cleaning.

Another standout characteristic of these models is their versatility. The EPDOM series comes with multiple attachments and accessories designed to tackle a range of cleaning tasks. From crevice tools for tight spaces to upholstery brushes for delicate fabrics, these accessories offer users the ability to customize their cleaning experience. This flexibility makes the EPDOM and EPDOMC suitable for different cleaning scenarios, whether it's daily dust removal or deeper, periodic cleanings.

The technology integrated into the EPDOM series also enhances their usability. Smart sensors detect dirt levels and adjust the suction power accordingly, ensuring optimal performance. This feature not only improves cleaning efficiency but also extends the lifespan of the appliance, as it prevents unnecessary strain on the motor. Moreover, these models are engineered for quiet operation, allowing users to clean without disturbing their households.

In terms of design, the EPDOM and EPDOMC boast a sleek, modern aesthetic that fits seamlessly into any home environment. The ergonomic handle ensures comfort during use, and the lightweight construction facilitates easy maneuverability around the home. Additionally, these vacuum cleaners feature a user-friendly interface, making it simple for people of all ages to operate.

Sustainability is also a key aspect of the EPDOM line. Electrolux has incorporated eco-friendly materials and energy-efficient technologies, reducing the environmental footprint associated with their use. This commitment to sustainability aligns with the growing consumer demand for environmentally responsible products.

In summary, the Electrolux EPDOM and EPDOMC represent a blend of power, versatility, and sustainability. Their advanced suction technology, diverse attachments, user-friendly design, and eco-conscious features make them an excellent choice for anyone in search of an effective home cleaning solution.
Top Page Image Contents