Electrolux ER 5763 C manual Instructions for the Installer, Installing the appliance, Cleaning

Location

The appliance should ventilated, dry room.

Technical data

Model

Gross capacity (l) Net capacity (l)

Width (mm)

Height (mm)

Depth (mm)

Energy consumption (kWh/24h) (kWh/year)

Energy class, according to EU standards Rated power (W)

Weight (kg)

Instructions for the Installer

ER 5763 C

Ice-making comp.: 5 Fresh food comp.: 65 Ice-making comp.: 5 Fresh food comp.: 62 525

520

587

0,42

153

B

55

24

be positioned in a well

Energy use is affected by the ambient temperature. The appliance should therefore:

not be installed next to radiators, cookers or other sources of heat

only be installed at a location where the ambient temperature corresponds to the climate classification, for which the appliance is designed.

The climate classification can be found on the data plate.

The following table shows which ambient temperature is correct for each climate classification:

Climate Classification	Ambient Temperature
SN	+10 to +32 °C
N	+16 to +32 °C
ST	+18 to +38 °C

Installing the appliance

Transportation, unpacking

The appliance and the interior fitting are protected for transport.

Remove all packaging and any adhesive tape.

Any remnants of adhesive can be removed using white spirit.

After transportation the appliance must not be switched on for 2 hours. This is to allow the refrigerant to settle.

Cleaning

Clean the accessories and the inside of the appliance with warm water and bicarbonate of soda (5 ml to 0.5 litres of water). Rinse and dry thoroughly.

Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol.

11