Electrolux ER 5763 C Using the Appliance, Before Use, Φ To Start the Appliance, Hints for storage

Using the Appliance

Before Use

Remove all securing tapes.

Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0,5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Do not use detergents, abrasive powders, highly perfumed cleaning products, wax

polishes or products containing alcohol.

ΦTo Start the Appliance

1.Allow the appliance to stand for 2 hrs after installation.

2.Plug in the appliance and switch on at the mains supply.

3.Turn the thermostat control knob to the required setting. A setting of 4 is usually suitable for normal operation (see thermostat control).

4.Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.

Thermostat Control

The thermostat control knob situated inside the refrigerator regulates the temperature of the refrigerator and ice-making compartment. Thermostat control knob is marked from 1-7 the higher the number, the colder the setting.

Position	0	-	Off
Position	1	-	Cold
Position	7	-	Coldest

Hints for storage

Suggested storage locations for different types of food produce:

1.Storing frozen foods, making ice and ice-cream.

2.Confectionery, ready-cooked foods

3.Foods in dishes

4.Opened cans

5.Milk, dairy products

6.Fresh meat, cold cuts, sausages, etc.

7.Fruits, vegetables, salads

8.Cheese, butter

9.Eggs

10.Yoghurt, sour cream

11.Bottles, drinks

6