4electrolux
Service
•Any electrical work required to do the serv- icing of the appliance should be carried out by a qualified electrician or competent per- son.
•This product must be serviced by an au- thorized Service Centre, and only genuine spare parts must be used.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in
either its refrigerant circuit or insulation materials. The appliance shall not be dis- carded together with the urban refuse and rubbish. The insulation foam con- tains flammable gases: the appliance shall be disposed according to the ap- plicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on this appliance marked by the symbol
are recyclable.
Control panel
1.Alarm reset switch
2.Alarm light
3.Action Freeze switch
4.Action Freeze light
5.Freezer pilot light
6.Freezer temperature regulator
7.Freezer OFF position
8.Fridge pilot light
9.Fridge temperature regulator
10.Fridge OFF position
Switching on
Insert the plug into the wall socket. Turn the Freezer temperature regulator clockwise to a medium setting.
The Freezer pilot light will light up.
Turn the Fridge temperature regulator clock- wise to a medium setting.
The Fridge pilot light will light up.
Important! If the temperature inside the appliance is too high the Alarm light will light up.
Switching off the freezer
To turn off the Freezer, turn the Freezer tem- perature regulator to the OFF position.
The Freezer pilot light will switch off.
Switching off the fridge
To turn off the Fridge, turn the Fridge tem- perature regulator to the OFF position. The Fridge pilot light will switch off.
Temperature regulation
The temperature is automatically regulated. To operate the appliance, proceed as fol- lows:
•turn the Temperature regulator counter clockwise to obtain warmer storage tem- perature.
•turn the Temperature regulator clockwise to obtain colder storage temperature.
A medium setting is generally the most suitable.
The exact setting should be chosen keeping in mind that the temperature inside the ap- pliance depends on:
•room temperature
•how often the door is opened
•the quantity of food stored
•the location of the appliance.
Important! If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the Temperature regulator must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.
Action Freeze function
You can activate the Action Freeze function by pressing the Action Freeze switch.
3) If a water connection is foreseen
