Electrolux ERB39251W Technical data, Installation, Replacing the lamp, Closing the door

Models: ERB34257W ERB39251W

1 16
Download 16 pages 8.41 Kb
Page 12
Image 12

12electrolux

Problem

The lamp does not work.

Door interferes with ven- tilation grill.

Misaligned door

Possible cause

The lamp is defective.

The door has been open to long.

The appliance is not levelled.

The appliance is not levelled.

Solution

Refer to "Replacing the lamp".

Close the door.

Refer to "Levelling"

Refer to "Levelling"

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

1.Disconnect the appliance from the power socket.

2.Fold the lamp cover backward by loosen the front edge.

3.Replace the bulb with one of the same power (the maximum power is shown on the light diffuser) and with E14 socket type.

4.Reconnect the appliance.

Closing the door

1.Clean the door gaskets.

2.If necessary, adjust the door. Refer to "In- stallation".

3.If necessary, replace the defective door gaskets. Contact the Service Center.

Technical data

Dimension Height

Width

Depth

Rising Time

ERB34257W

1750 mm

595mm

623mm

18h

ERB39251W

1950 mm

595mm

600mm

18h

The technical information are situated in the rating plate on the internal left side of the ap- pliance and in the energy label.

Installation

Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the appliance:

Page 12
Image 12
Electrolux ERB39251W, ERB34257W user manual Technical data, Installation, Replacing the lamp, Closing the door, Positioning