IMPORTANT: The license key is stored on the hard drive. If no hard drives are installed, the license key cannot be installed.
Before installing the license key, be sure that hard drives are installed. For more information on installing hard drives, see the server user guide.
To obtain the license key, see the entitlement certificate included with the HP Hot Plug Advanced Pack. Depending on the method of delivery, the certificate is provided either in a sealed envelope or in an email message.
To install the license key, use one of the following methods:
•Installing a license key with ORCA (on page 8)
•Installing a license key with ACU (on page 9)
Installing a license key with ORCA
To install a license key:
1.Power down the server, if necessary.
2.Power up the server. POST runs.
During POST, all controllers in the server are initialized one at a time in the current boot order sequence. If a controller is connected to one or more hard drives, a message appears during the initialization process for that controller, prompting you to start ORCA.
3.At the ORCA prompt for the controller that you want to configure, press the F8 key.
IMPORTANT: If no hard drives are installed, then this option does not appear.
Enabling and configuring the controller 8