Using the fridge
To start the fridge and thermostat control
Turn the thermostat control knob to the desired position.
MIN The lowest position of the thermostat control results in the highest temperature inside the cabinet. MAX The highest position of the thermostat control results in the lowest temperature inside the cabinet. H : Switched off.
Allow the appliance to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the appliance.
Temperature inside the fridge
A suitable temperature inside the fridge is approx. +5°C. If the thermostat control is set too cold, food with a high water content may start to freeze if it has been placed in the coldest places in the fridge.
(+ warm, - cold)
Meat, fish and milk should be put in the coldest part of the cabinet.
The temperature will be affected by:
·How often the door is opened
·How much food is stored
·Position of the appliance (See the Installation section.)
Measuring the temperature
If the temperature is measured using a standard, single thermometer, this should be put in a glass of water centrally placed inside the appliance. This will reflect the temperature inside the food products. Do not place the thermometer hanging or lying directly on the shelf.
·Distribute foodstuffs to allow cold air to circulate freely between the products.
·Do not place food products directly against the cooling plate on the rear wall as they may freeze here.
·Also never put warm products into the appliance. Wait until they have cooled down.
·Cover all foods properly to avoid odours and flavours from tainting other food.
Switching off
Turn the control
Remove the power supply plug from the wall socket.
+ +
+
+ | + | |
+ | + | |
+ | ||
|
Electrolux 818 21
5
