Service during operation
The water filter is replaced as follows: Place a piece of kitchen tissue or a dishcloth in the space under the filter. Remove the filter by turning it clockwise. A small amount of water will run out. Dry off and fit the new filter. See the section "When starting the water system for the first time".
The water connection does not need to be switched off when changing the filter.
Replacement filters can be ordered from Electrolux Service Force Centre. See the section "Service and replacement parts".
The gas cylinder is replaced as follows: remove the gas cylinder and transfer the adapter to the new cylinder.
The replacement gas cylinder is obtained through your local dealer.
To change the lamp
The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet. Disassemble the lamp by using a screwdriver in the recess on the lamp insert. To prise it out of its location. Assemble a new lamp by guiding it into a centred position and press until it snaps into place.
Use a halogen bulb of the same type, maximum rating of 20 W.
Change of carbon filter
To maintain the best performance the carbon filter should be changed once a year with normal usage.
New carbon filters can be purchased from your local dealer. The filter is placed behind the grill and can be reached by opening the cover. The cover can be opened by simulta- neously pressing the lever on the right of the grill (1) and turning the cover outward (2). The carbon filter is then pulled out of its slot (3).
The new carbon filter is placed in the existing slot - The filter should be handled carefully so fragments do not loosen from the surface.
1 |
2 | 3 |
Defrosting the fridge
The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by:
·not putting warm foodstuff inside the cabinet.
·avoiding frequently opening the door or keeping it open too long.
16
