Electrolux ERES31800W, ERES31800X user manual Technical Specification

Only gas comes out when	Incoming water pressure too high. Install a
opening	pressure-limiting device.
	Capacity temporarily exceeded. Wait for ten
	minutes.
The water dispenser lamp and	Leakage at the water connection. Internal
the yellow indicator lamp	leakage, please contact your local Electrolux
flashes	Service Force Centre.
Indicator lamp for the water	The filter has been totally utilised. Replace the
filter flashes.	filter.
The indicator lamp stays on	80 % of the filter capacity expended. Buy a
and shows yellow	new filter.
Delivery is interrupted after a	The maximum time of two minutes is
short time	attained. Continue with delivery.

If after above checks there is still a fault call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that proof of purchase is required for in-guarantee service calls.

TECHNICAL SPECIFICATION

Model	ERES31800W/ERES31800X
Net capacity Refrigerator l	311
Energy consumption kWh/y	173
Dimension mm
Height	1800
Width	595
Depth	650

Permissible water pressure (to ensure reliable function).

The total flow in the system can vary, depending on local water conditions and/or water pressure.

Lowest permissible water	Consult your installer if water pressure is
pressure. 2,5 bar (250kPa)	less than 2,5 bar.
Highest permissible water	If water pressure exceeds 5 bar, than a
pressure. 5 bar (500kPa)	reduction valve must be fitted (available
	from your specialist shop).

19