Sound level in cabinet is too

The refrigerating system will always produce

high.

some sounds. A pulsing sound is heard when

 

coolant is pumped inside the cooling pipes.

 

A ticking sound from the thermostat can be

 

heard when the compressor switches on and

 

off. The sound level varies depending on the

 

operation of the cabinet.

 

If you feel the sound level is incorrect:

 

Make sure the pipes at the back of the

 

cabinet do not touch each other. Carefully

 

bend them if they do.

 

If the cushion spacers (between the cabinet

 

wall and pipes) come loose, put them back in

 

place again.

 

Carefully follow the instructions in the chapter

 

"Installing the cabinet".

 

 

The cabinet does not operate

Power does not reach the cabinet. (Try

at all. Cooling or interior light

connecting another electrical device to the

does not operate. No indicator

power outlet.)

lamps light.

The cabinet is not switched on.

 

The fuse has blown.

 

The power plug is not properly connected.

 

 

Not enough carbon dioxide in

Incoming water pressure too low.

the water

The carbon dioxide is running out. Replace

 

the gas cylinder.

 

 

Too much carbon dioxide in

Dilute with ordinary water. (See the section

the water

"The water dispenser functions")

 

 

No carbon dioxide.

The gas cylinder is empty. Replace the gas

 

cylinder.

 

Drain off a large amount of carbonated water

 

(about 1 litre)

 

Incoming water pressure too low.

 

 

Water flow very low

Remove and clean the strainer in the

 

connecting valve.

 

Sediment in the water. Replace the filter or

 

install a pre-filter.

 

 

17

Page 17
Image 17
Electrolux ERES35800 Sound level in cabinet is too, High, Cabinet does not operate, Lamps light, Water, No carbon dioxide