Electrolux ERF37800WX freezer, Too much frost and ice are, produced, The compressor operates

Models: ERF37800WX

1 52
Download 52 pages 5.44 Kb
Page 17
Image 17

It is too warm inside the

Set a lower temperature.

freezer.

Make sure that the door is completely closed

 

and that the insulating strip is complete and

 

clean.

 

If warm food products have been put inside

 

the freezer, wait for a couple of hours and

 

then check the temperature again.

 

Distribute the food products to allow cold air

 

to circulate around them.

 

 

It is too cold inside the freezer.

Set a warmer temperature.

 

Action Freeze could have been switched on.

 

The temperature display shows the highest

 

temperature inside the cabinet. Thus a

 

difference between the temperature indicated

 

on the display and the (average) temperature

 

measured in another way is normal.

 

 

Water comes out on the floor.

Place the drain hose at the back of the

 

cabinet above the drain bowl. See the

 

chapter "Before using the cabinet the first

 

time".

 

 

Too much frost and ice are

Make sure that the door is completely closed

produced.

and that the insulating strip is complete and

 

clean.

 

 

The compressor operates

Set a warmer temperature.

continuously.

Make sure that the door is completely closed

 

and that the insulating strip is complete and

 

clean.

 

 

The cabinet does not operate

The cabinet is not switched on.

at all. Cooling or interior light

Power does not reach the cabinet. (Try

does not operate. No indicator

connecting another electrical device to the

lamps light.

power outlet.)

 

The power plug is not properly connected.

 

The fuse has blown.

 

 

17

Page 17
Image 17
Electrolux ERF37800WX freezer, Too much frost and ice are, produced, The compressor operates, continuously, lamps light