Cleaning
Wash the inside of the cabinet using lukewarm water, a mild
Installing the cabinet
Make sure that the power plug is not squashed or damaged by the back of the product.
·A damaged power plug may overheat and cause a fire.
Do not place heavy articles or the product itself on the power cord.
·there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the power plug.
·there is a risk of electric shock or fire.
To obtain the best performance from the cabinet, ensure:
·the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.
·the cabinet is not placed close to a source of heat, e.g. a cooker or dishwasher.
·the cabinet is level. The cabinet should not lean against any wall. If necessary adjust the feet using the adjustment spanner supplied.
·there is good air circulation around the cabinet and that the air channels below and behind the cabinet are not
blocked. The ventilation space above the cabinet must be at least 4 cm. The ventilation space can either be
a)directly above the cabinet, or
b)behind and above the top cupboard. In this case, the space behind the cupboard must be at least 50 mm deep.
a)b)
50mm
Cabinet is placed at a location where the ambient temperature corresponds to the climate classification*, for which the appliance is designed.
*See on the rating plate on the inside of the appliance.
The following table shows which ambient temperature is correct for each climate classification.
Climate | for an ambient |
classifi- | temperature of |
cation |
|
SN | +10°C to +32°C |
N+16°C to +32°C
ST | +18°C to +38°C |
T+18°C to +43°C
20
