something not working electrolux 27
Something not working

The dishwasher will not start or stops during operation.

Certain problems are due to the lack of simple maintenance or oversights,

which can be solved with the help of the indications described in the chart,

without calling out an engineer.

Switch off the dishwasher, open the door and carry out the following suggested

corrective actions.

Fault code Malfunction Possible cause Solution

●continuous flashing
of the start/cancel
indicator light
●1 flash of the end
of programme
indicator light
The dishwasher
does not fill with
water
●The water tap is
blocked or furred
with limescale
●The water inlet
hose has not been
correctly laid or it
is bent or
squashed
●The filter (where
present) in the
threaded hose
fitting at the water
inlet valve is
blocked
●The water tap is
turned off
●Check the water
drain hose
connection
●Turn the water tap
on
●Clean the filter in
the threaded hose
●Clean the water
tap
●continuous flashing
of the start/cancel
indicator light
●2 flashes of the
end of
programme
indicator light
The dishwasher will
not drain
●The sink spigot is
blocked
●The water drain
hose has not been
correctly laid or it
is bent or
squashed
●Clean out the sink
spigot
●Check the water
drain hose
connection
●continuous flashing
of the start/cancel
indicator light
●3 flashes of the
end of
programme
indicator light
Anti-flood device is
activated
●Close the water
tap and contact
your local Service
Force Centre
117997 92/0en 5-09-2006 15:18 Pagina 27