28 electrolux something not working
Fault code | Malfunction |
The programme does not start
Possible cause
●The dishwasher’s door has not been properly closed
●The main plug is not plugged in
●The fuse has blown out in the household fuse box
●Delay start has been set
Solution
●Close the door
●Insert the main plug
●Replace the fuse
●If dishes are to be washed immediately, cancel the delay start
Once these checks have been carried out; close the dishwasher’s door and switch on the appliance (remember to position the programme knob in correspondence with the programme that was running before the intervention of the alarm).
Press the start/cancel button.
The programme will continue from the point at which it was interrupted.
If the malfunction or fault code reappears contact the Service Force Centre.
For other fault codes not described in the above chart, please contact your Service Force Centre.
Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on the side of the dishwasher door.
So that you always have these numbers at hand, we recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
