troubleshooting
PROBLEM | POSSIBLE CAUSE | WHAT TO DO |
|
|
|
Dishwasher leaks | • Overfi ll dispenser or rinse aid | • Be careful not to overfi ll the rinse aid |
| spills. | dispenser. |
|
| Spilled rinse aid could cause |
|
| oversudsing and lead to overfl owing. |
|
| Wipe away any spills with a damp |
|
| cloth. |
|
|
|
| • Dishwasher isn’t level. | • Make sure the dishwasher is level. |
|
|
|
The result of washing performance can be wrong because problem with power supply (interruption of electric power). Pls check the result one more time before calling service.
ERROR CODES
When some malfunctions come on, the appliance will display error codes to warn you:
CODES | MEANING | POSSIBLE CAUSES | |
|
|
| |
| Longer water inlet time | Faucets is not opened, or water | |
E1 |
| intake is restricted, or water pressure | |
|
| is too low. | |
|
|
| |
E2 | Failure of drain | Not drain out all water or water | |
| pressure switch problem. | ||
|
| ||
|
|
| |
E3 | Longer heating time, but not reaching | Malfunction of temperature sensor or | |
required temperature. | of heating element. | ||
| |||
|
|
| |
E4 | Overfi lled | Too much inlet water. | |
|
|
| |
E5 | Lower water pressure | Lower water pressure or water | |
| pressure switch problem. | ||
|
| ||
|
|
| |
E6 | Failure of temperature sensor | Short circuit or break of temperature | |
| sensor. | ||
|
| ||
|
|
| |
E7 | Failure of temperature sensor | Open circuit or break of temperature | |
| sensor. | ||
|
| ||
|
|
| |
E8 | Failure of alternate valve | Can not go to correct position of | |
| alternate valve. | ||
|
| ||
|
|
| |
EA | Failure of water pressure switch | Higher water pressure or water | |
| pressure switch problem. | ||
|
| ||
|
|
| |
UC | Voltage abnormality | Voltage < 180±4V or > 270±4V. | |
|
|
|
WARNING : If overfl ow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an over fi ll or small leak, the water should be removed before restarting the dishwasher.