Electrolux ESL 2435 manual Installing the dishwasher, Installation

Models: ESL 2435

1 24

Page 20

Installation

1. Put the dishwasher into the cupboard and screw the mounting plate into position from underneath with 2 screws, with the washers between.

2.Put the spacers provided at the sides of the machine and screw the machine into place in the cupboard.

Check that there is a space between the cupboard frame and the wooden door when it is shut.

- 20 -

Image 20

Contents

Page Contents Safety informationAdjusting the water softener Programme chartSafety information Installation and servicingChild Safety DisposalDescription of the appliance Spray arm Coarse strainer/microﬁlterFine ﬁlter Detergent dispenserSwitching the buzzer off Setting the delay startCancelling the delayed start The control panelAdjusting the water softener Setting on theWater hardness level Number of lightProgramme chart Type ofPlates and All types ofHow to load the dishes Loading and unloading the dishwasherUnloading BasketsUsing the appliance Cancelling the programmeCancelling the drying phase Switching the dishwasher offMaintenance and cleaning Cleaning the ﬁltersCleaning the spray arm Cleaning the cabinetFault Something Not WorkingCheck FaultService Service and Spare Parts08705 Customer Care DepartmentGuarantee Conditions Standard guarantee conditionsEuropean Guarantee ExclusionsInstallation instructions Technical speciﬁcationsDimensions WeightUnpacking DamagesInstallation PositionMeasurements for ﬁtting a wooden door A B CPreparing the outer door Mount plate2x 4x A B CInstallation Fitting the outer doorFitting protective and inﬁll strips Installing the dishwasher InstallationInstallation Water inletWater drainage Power supply InstallationWARNING THIS APPLIANCE MUST BE EARTHED Green and YellowInformation for test centres