Switching off the dishwasher
If the acoustic signal has been enabled, a continuous tone will sound for 15 seconds at the end of the dish- washing cycle.
1Hot steam may escape if the door is opened immediately after the cycle has ended. Therefore:
1.Open the door carefully.
2.Switch off the dishwasher by pressing the ON/ OFF button.
All display indicators will go out.
If you do not switch off the dishwasher, the acous- tic signal will sound again 3 minutes later and 6 minutes later.
3Unload the dishes
•Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool before they are removed.
•Leave the dishes in the dishwasher for approxi- mately 15 minutes following the end of the cycle to enable better drying and cooling down of dishes.
•Empty the lower basket first, then the upper bas- ket. This will avoid water spots, which are caused by remaining water in the upper basket dripping onto the dishes in the lower basket.
24
