INSTALLATION AND CONNECTION INSTRUCTIONS
Installing the Dishwasher
•The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level.
• To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units extend the threaded feet by unscrewing:
– use a screwdriver.
•For
washers, the rear feet should be adjusted from the front of the appliance using a screwdriver.
•The drain hose, inlet hose and mains cable must not be kinked or crushed when the dishwasher is in position.
•In addition, the dishwasher must be firmly screwed to the work surface or to the neighbour- ing units. This is essential to ensure the dish- washer does not tip.
Installing the Furniture Door
(see installation template supplied)
3The door of the appliance can be fitted with a wooden furniture door of the following dimen- sions:
Width: | 591 mm – 594 mm | |
|
| |
Thick- | 16 mm – 24 mm | |
ness: | ||
| ||
|
| |
Height: | max. 715 mm | |
|
| |
Weight: | max. 10 kg | |
|
|
31
