Activating/deactivating the acoustic signal
The acoustic signal can indicate acoustically:
–at which water hardness the water softener is set.
–when a dishwashing cycle has finished.
–when an error has occurred with the dish- washer.
You can switch on/off the acoustic signal in the follow- ing way:
1.Press the ON/OFF button.
The LED indicators for all the buttons in the con- trol panel that are now able to be selected will become illuminated.
3If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cycle must be deselected (RESET):
Press function buttons 2 and 3 simultane- ously for approx. 1 second.
The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.
2.Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for the function buttons 1 to 3 will flash.
3.Press function button 3.
The LED indicator for function button 3 will flash. The wdisplay will indicate the current setting:
The wdisplay is | Acoustic signal activated |
continuously illumi- | |
nated: |
|
|
|
The windicator is | Acoustic signal deactivated |
not flashing: |
|
|
|
4.Pressing function button 3 will change the setting.
5.Once the wdisplay is indicating the required set-
ting, press the ON/OFF button. The setting is now saved.
15