INSTALLATION

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.

Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.

electrolux 39

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a contact for this purpose.

If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if the above safety precautions are not observed.

100 mm

mm10 NP00

10 mm

This appliance complies with the following E.E.C. Directives:

87/308 EEC of 2/6/87 relative to

radio interference suppression.

73/23 EEC of 19.2.73 (Low Voltage

Directive) and subsequent

modifications;

89/336 EEC of 3.5.89

(Electromagnetic Compatibility

Attention

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Directive) and subsequent

modifications.

Page 18
Image 18
Electrolux EUF 27391 S manual Installation, Location, Electrical connection