Operating sequence
Important:
6 Select the temperature
Before washing your first load of laundry, we recom- mend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufactur- ing residue from the drum and tub.
Pour half a measure of detergent into the main wash compartment and start up the machine.
Automatic washing plus drying (NON-STOP operation)
This option is only possible for cottons and synthetics.
95° |
P0880 |
Turn the temperature selector dial to the re- quired value.
Maximum load: |
|
– cotton, linen | 3 kg |
– synthetics | 2 kg |
1 Place the laundry in the drum
Open the door by press-
ing the 
button and place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0004
2 Measure out the detergent
7Select the programme and start the machine
Turn the programme selector dial to the right to the required setting and depress the ON/OFF button: the operating pilot light and door locked light come on and the machine starts.
| 1 |
P1011 | P0080 |
P0876 |
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recom- mended by the manufac- turer in a graduated cup and pour it into the main
wash compartment 
.
8 At the end of the programme
The machine stops automatically.
Washing only
After a programme which stops with water in the drum, the water must be emptied out before opening the door.
It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release. The door cannot be opened until the door
3 Measure out the additive
locked light goes out.
P0877 |
If required, pour fabric conditioner into the com-
partment marked 
, without exceeding the «MAX» mark.
Depress the ON/OFF button again to switch the ma- chine off, the operating pilot light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being dam- aged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
4Select the required option
5Select the drying time
Turn the selector dial clockwise to the required time (red or blue sector, depending on the type of fabric).
13
