Manuals / Electrolux / Laundry Appliance / Washer/Dryer

Electrolux EWD 1409 I manual Unpacking, Positioning, Water inlet

Models: EWD 1409 I

1 32
Download 32 pages 16.17 Kb
Page 26
Image 26

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all the packaging for re-use in case the machine is to be transported again.

Using a spanner unscrew and remove the rear right bolt.

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which the bolts were fitted.

Plug the open holes with the plugs supplied with the instruction booklet.

Lay the machine gently on its back, making sure that the hoses are not squashed.

P0256

P0020

Remove the polystyrene base and take off the bottom panel by unscrewing the central screw. Carefully slide out the right polythene bag.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine

P0457

P0015

does not touch the wall or other kitchen units.

Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Your new washer-dryer has been designed to be permanently plumbed in to your home’s water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink.

Repeat the operation for the left and central polythene bags.

Re-fit the bottom panel using the 4 screws supplied with the door hinges (in the plastic bag) and the previously removed screw.

The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing

P0016

P0453

must be carried out by a competent person, or qualified plumber.

Water inlet

Connect the hose to a tap with a 3/4’’ thread. Do not use previously employed hoses.

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be connected to a cold water supply.

A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance

26

Page 25 Page 27
Page 26
Image 26
Electrolux EWD 1409 I manual Unpacking, Positioning, Water inlet, Install the machine on a flat hard floor
Page 25 Page 27

EWD 1409 I specifications

The Electrolux EWD 1409 I is a versatile and efficient washer-dryer that caters to the needs of modern households. This innovative appliance stands out for its combination of advanced technology, energy efficiency, and user-friendly features, making laundry a far more manageable task.

One of the standout features of the EWD 1409 I is its impressive washing capacity. With a maximum load of 9 kg for washing and 5 kg for drying, it strikes a fine balance between catering to small and large loads without compromising on performance. The washer-dryer is equipped with various washing programs, including delicate, cotton, and synthetic cycles, ensuring that all fabrics are cared for appropriately. It also features a quick wash option, allowing users to clean lightly soiled items in just 20 minutes.

The EWD 1409 I incorporates cutting-edge technology to enhance cleaning performance. Its innovative sensor technology automatically detects the load size and adjusts water and energy consumption accordingly, promoting efficiency and sustainability. This appliance boasts an A-rated energy efficiency classification, helping families reduce their carbon footprint while saving on utility bills.

In addition to its efficient washing capabilities, the EWD 1409 I also excels in drying performance. The integrated drying function utilizes a heat pump system, a gentler method that minimizes fabric wear while ensuring effective moisture removal. This technology makes it suitable for a wide range of fabrics, providing peace of mind that clothes will come out dry and unharmed.

User convenience is also a priority in the design of the EWD 1409 I. Its intuitive control panel features a digital display, allowing users to easily select programs and monitor the progress of the wash and dry cycles. The delay start option is particularly useful for those with busy schedules, enabling users to schedule their laundry to start at a later time.

With its modern design and compact dimensions, the Electrolux EWD 1409 I fits seamlessly into any home environment. Its combination of efficiency, performance, and user-friendly features makes it a valuable addition to any laundry room, meeting the needs of users while enhancing the overall laundry experience.