Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. The rating plate is located at the top of the rim of the open door.

 

Mod

 

Prod. No

P0042 BD

Ser. No

 

The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue- Neutral

Brown- Live

GREEN & YELLOW

E

The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow.

The wire coloured blue must be connected to the terminal «N» or coloured black.

The wire coloured brown must be connected to the terminal marked «L» or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

WARNING:

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of safely. Should the appliance power supply cable neeed to be replaced, this must be carried out by our Service Force Centre.

Note

When the appliance is installed the power supply cable must be accessible.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

N

13 A

L

BROWN

BLUE

 

 

CORD CLAMP

P1041

 

 

 

29

Page 28 Page 30
Page 29
Image 29
Electrolux EWD 1409 I manual Electrical connection, Permanent connection, Blue- Neutral Brown- Live
Page 28 Page 30

EWD 1409 I specifications

The Electrolux EWD 1409 I is a versatile and efficient washer-dryer that caters to the needs of modern households. This innovative appliance stands out for its combination of advanced technology, energy efficiency, and user-friendly features, making laundry a far more manageable task.

One of the standout features of the EWD 1409 I is its impressive washing capacity. With a maximum load of 9 kg for washing and 5 kg for drying, it strikes a fine balance between catering to small and large loads without compromising on performance. The washer-dryer is equipped with various washing programs, including delicate, cotton, and synthetic cycles, ensuring that all fabrics are cared for appropriately. It also features a quick wash option, allowing users to clean lightly soiled items in just 20 minutes.

The EWD 1409 I incorporates cutting-edge technology to enhance cleaning performance. Its innovative sensor technology automatically detects the load size and adjusts water and energy consumption accordingly, promoting efficiency and sustainability. This appliance boasts an A-rated energy efficiency classification, helping families reduce their carbon footprint while saving on utility bills.

In addition to its efficient washing capabilities, the EWD 1409 I also excels in drying performance. The integrated drying function utilizes a heat pump system, a gentler method that minimizes fabric wear while ensuring effective moisture removal. This technology makes it suitable for a wide range of fabrics, providing peace of mind that clothes will come out dry and unharmed.

User convenience is also a priority in the design of the EWD 1409 I. Its intuitive control panel features a digital display, allowing users to easily select programs and monitor the progress of the wash and dry cycles. The delay start option is particularly useful for those with busy schedules, enabling users to schedule their laundry to start at a later time.

With its modern design and compact dimensions, the Electrolux EWD 1409 I fits seamlessly into any home environment. Its combination of efficiency, performance, and user-friendly features makes it a valuable addition to any laundry room, meeting the needs of users while enhancing the overall laundry experience.
Top Page Image Contents