Reset/cancellation of the programme
If the programme selector dial is turned to Off position, three blinking dashes are displayed.
Now you can select a new programme.
(If the programme selector dial has not been turned to Off position at the end of the previous washing cycle, when you press the ON/OFF button to switch the machine on, the display will show a blinking zero.)
Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes (for example 2.05).
Delayed start
The selected delay (23 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed.
The countdown is updated every hour and, when remain the last 2 hours, each 30 min.
Delay
start
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for 2 seconds.
2.05
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Drying time
The selected drying time is displayed in minutes.
105
After starting the programme, the remaining time is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
E20
8
