End of programme
When the programme has finished a flashing zero is displayed. The door can be opened when the “End” pilot light has gone out and if the Rinse hold 
or Night Cycle option has not been selected.
0
13 Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After the machine has started, only the running phase light illuminate and stay on.
When the programme has finished, the “End” pilot light comes on.
Prewash
Wash
Rinses
Rinse Hold
Drain
Spin
Drying
End
The “End” pilot light flashes in the event of operating problems and the corresponding alarm code appears on the display.
E10 = the machine does not fill
E20 = the machine does not empty
E40 = the door has not been closed
To eliminate the problem, see paragraph “Something not working”.
14 Programme selector dial
The selector is divided into 5 sections:
•Cotton,
•Synthetics
•Delicates
•Handwash /Wool 
•Special programmes Reset programme Off
|
|
|
|
|
|
|
|
|
|
|
| Miniprogram Off | 95° | E60° | Cotton |
| |||
| Easy Iron |
|
|
|
| ||||
|
|
|
|
|
| ||||
| Spin |
|
|
|
| 60° |
| ||
| Drain |
|
|
|
|
|
| E40° |
|
| Rinses |
|
|
|
|
|
| 40° |
|
| 30° |
|
|
|
|
|
| 30° |
|
|
|
|
|
|
|
| Drying |
| |
| Handwash40° |
|
|
|
|
|
| 60° |
|
|
|
|
|
|
|
| E60° |
| |
| Delicates | 30° | 40° Drying | 30° | 40° |
| Synthetics |
| |
|
|
|
|
| |||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The selector dial can be turned either clockwise or anticlockwise.
Positions E60° and E40° correspond to the ENERGY SAVING programmes and position 
to “cold wash”.
At the end of the programme the selector dial must be turned to position OFF (reset).
Functions
End of programme
When the “End” pilot light on the programme progress display illuminates, the door can be opened (if the Rinse hold 
or Night Cycle option has not been selected).
Turn the programme selector dial to Off.
Switch the machine off by depressing the ON/OFF 
button before removing the laundry.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washer dryer by pressing the Start/Pause button.
Changing a running programme is possible only by resetting it. Turn the programme selector dial to "Off" and then to the new programme position. The washing water in the tub will not emptied out .
Start the new programme by depressing the Start/Pause button.
9
