Select the spin speed, Rinse Hold or No Spin option by pressing button 3
Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.
When you select a programme, the machine automatically proposes the maximum spin speed provided for the programme.
Rinse Hold: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows 0.00 flashing, the pilot light 9 is on, the light of button 8 is off and the door is locked to indicate that the water must be emptied out.
To empty the water out, please read the chapter «At the end of the programme».
No spin : by selecting this option, all spinning phases are suppressed and replaced by a drain, so as not to wrinkle the laundry.
On some programmes the rinses will be performed with more water.
Select the Easy Iron option by pressing button 4
By selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform some additional rinses for cotton and synthetics.
In the programmes for cotton the spin speed is automatically reduced.
use electrolux 13
This function can be used for cotton and synthetic fabrics.
Select the Extra Rinse option by pressing button 5
The machine performs some additional rinses. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Select the Delay Start by pressing button 6
Before you start the programme, if you wish to delay the start, press button 6 repeatedly, to select the desired delay. The relevant light will illuminate.
The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you press button 8.
The door will be locked throughout the delay time. If you wish to add laundry in the machine during the delay time you will press button 8 to put the machine in pause and wait until the pilot light 9 goes out before opening the door. Add the laundry, close the door and press the button 8 again.
You can cancel or modify the delay time at any moment, before you press button 8.
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Selecting the delayed start.
•Select the programme and the required options.
•Select the delay start.
