36electrolux installation

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Warning!

THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any lia- bility should this safety measure not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate.

Important!

Information on the electrical connection is given on the rating plate on the inner edge of the appliance door.

The appliance is supplied with a 13amp plug fitted.

In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires in the mains lead are coloured in accordance with the follow- ing code:

Green and Yellow

- Earth

Blue- Neutral

Brown- Live

GREEN & YELLOW

E

 

13 A

N

L

 

BROWN

BLUE

P1041

CORD CLAMP

 

The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow.

The wire coloured blue must be con- nected to the terminal «N» or coloured black.

The wire coloured brown must be con- nected to the terminal marked «L» or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

Warning!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is dis- posed of safely. Should the appli-

Page 36
Image 36
Electrolux EWG 12450 W user manual Electrical connection, This Appliance Must be Earthed